Roof Replacement guide
A plain language guide to the Florida-code standard and why a Delaware roofer would build to it.
Last updated: November 21, 2026
ProCraft is the only Delaware roofer licensed in Florida installing the Florida-code roofing system in Delaware.
Florida code is the roofing standard written for hurricane wind and wind-driven rain. Building a Delaware roof to that standard is about margin: the same layers and fastening discipline, applied to nor'easters, coastal storms, and freeze and thaw.
At the perimeter, where storms try to lift the system. Across the deck, where full protection keeps a shingle problem from becoming a deck problem. At the seams and flashing, where water actually enters. And in the attic, where ventilation protects everything above it.
The full layer walk-through lives on the Florida-Code System page.
It is not a claim that Delaware weather is Florida weather, and it is not a promise that any roof survives any storm. It is a documented standard, installed the same way on every ProCraft Delaware roof.
No. It is a higher standard ProCraft chooses to build to, as the only Delaware roofer licensed in Florida.
From the street, it looks like a well-built architectural shingle roof. The differences are in the layers and fastening under the surface.
Your written estimate lists the build, and the installation is photographed as it proceeds.
You started an inspection request.
Pick up where you left off. Your answers are saved on this device.