Delaware roof replacement and window replacement.(302) 286-9407
ProCraft Delaware
Roof ReplacementCommercial RoofingWindow ReplacementFlorida-Code SystemProcessService AreasAboutRequest My Free InspectionCall (302) 286-9407

Roof Replacement in Delaware

A free inspection, photo findings, and a written estimate for a Florida-code roofing system installed for Delaware weather. ProCraft is the only Delaware roofer licensed in Florida installing the Florida-code roofing system in Delaware.

  • Free inspection with photo findings
  • Written estimate before you decide
  • Low monthly investment plans available
Call (302) 286-9407
Delaware home with a completed ProCraft roof replacement

Check service and request your free inspection

Free inspection, photo findings, and a written estimate.

Step 1 of 3
Where is the home?
Do you own this home?

Free inspection. No obligation.

Is replacement the right step?

Signs the system is at the end of its service life

Age plus wear, across the whole roof

Most shingle roofs give 20 to 30 years of service. When curling edges, granule loss, and soft or stained areas show up on several slopes at once, the system is worn out as a system, not in one spot.

Water where it does not belong

Ceiling stains, attic moisture, and drips during wind-driven rain mean water is already past the shingles. The question the inspection answers is how far it has traveled and what the deck looks like.

Shingles missing, lifted, or brittle

Tabs that break when lifted and fasteners showing through are signs the mat has lost its flexibility. Those areas let storms in.

Granules washing off

Granules protect the shingle from the sun. Heavy granule loss at downspouts and in gutters means the weathering surface is going.

ProCraft performs full replacements only. If the inspection finds a condition outside replacement work, such as structural damage to framing, we document it plainly and tell you what kind of professional it calls for. We will not sell you work we do not perform.

The inspection

What the inspection documents

You receive the photo findings and the written estimate. Both are yours to keep either way.

The differentiator

Built to Florida code, installed in Delaware

ProCraft is the only Delaware roofer licensed in Florida installing the Florida-code roofing system in Delaware.

Florida code is the standard written for hurricane wind and wind-driven rain. Delaware weather is not Florida weather, and that is the point: nor'easters, coastal storms, and freeze and thaw cycles all work a roof hard, and a system built for the harder standard carries margin into every one of them.

Learn How the System Works

The system

How the replacement is built

Deck protection
Underlayment
Starter course
Shingles
Flashing
Ventilation
Ridge finishing
The Florida-code roofing system, layer by layer, as installed on Delaware homes.
  • 1Deck protection. The roof deck is inspected and prepared, with damaged sections documented before anything is covered up.
  • 2Underlayment. A full-deck protective layer goes down over the deck, the base of the Florida-code approach to wind-driven rain.
  • 3Starter course. Starter shingles seal the eave edge, the first line against wind uplift at the roof perimeter.
  • 4Shingles. Architectural shingles form the visible weathering surface, installed to the pattern the system calls for.
  • 5Flashing. Metal flashing seals the joints at walls, chimneys, and valleys, where most leaks actually start.
  • 6Ventilation. Balanced attic ventilation moves heat and moisture out, protecting the deck and the shingles above it.
  • 7Ridge finishing. Ridge cap shingles close the peak and finish the ventilation path at the top of the system.

On real roofs

The system, photographed during installation

Full-deck underlayment protection installed on a ProCraft roof
Full-deck protection layer, installed before the shingles go on.
Roof deck with taped seams on a ProCraft installation
Deck seams sealed as part of the system build.
ProCraft crew installing a replacement roof
A replacement roof in progress, installed by ProCraft.

Process

Four steps, each with a deliverable

1

Inspection

Your roof or windows are documented with photos, measurements, and notes on condition, so the estimate is built on what is actually there.

2

Written Estimate

You receive the scope and the overall investment in writing, with product options explained in plain language before you decide anything.

3

Production

The approved work is performed under the written scope, with the site protected and debris removed as the work proceeds.

4

Final Walkthrough

The completed work is reviewed with you, and any open items are written down before the job is closed.

Investment

What shapes the overall investment

  • Roof size and pitch
  • Layers coming off
  • Decking condition found at tear-off
  • Material selection
  • Flashing complexity at walls, chimneys, and valleys
  • Ventilation work
  • Access around the home

Every factor is listed in the written estimate. No dollar figure is quoted before the roof is measured and inspected.

Monthly investment

Spread it out if that fits better

For homeowners who prefer a monthly path, low monthly investment plans available. The details are reviewed with you in writing before you approve anything.

Request My Free Inspection

Delaware weather

Built for the weather Delaware actually gets

Coastal wind and nor'easters

Storms rolling up the coast drive rain sideways and test every edge and fastener. Perimeter sealing and fastening patterns are where that fight is won, and both are core to the system build.

Coastal moisture and salt air

Beach and bay towns keep roofs damp longer and age metal components faster. Flashing choices and full-deck protection matter more here than inland.

Summer heat

Hot attics cook shingles from below. Balanced ventilation moves that heat out and protects both the deck and the shingle life above it.

Winter ice

Ice dams form when attic heat melts snow that refreezes at the eave. Full-deck protection at the eaves and working ventilation both push against that cycle.

Tree cover

Mature canopy drops debris, holds shade and moisture on northern slopes, and feeds moss and algae. The inspection reads those slopes first.

Storm documentation

After a storm, dated photos and a written condition report organize your conversation with your insurer. See the storm and hail damage page.

Coverage

Roof replacement across Delaware

Questions

Roof replacement questions, answered

How do I know my roof needs replacement instead of attention to one spot?

Age plus pattern. A single damaged area on a young roof is one thing. Curling, granule loss, and soft spots spread across several slopes mean the system is at the end of its service life, and work on one spot will not change that. The inspection documents the whole roof so the decision is based on the full picture.

How long does a replacement take?

Most Delaware homes are completed in days, not weeks, once production starts. The exact schedule depends on roof size, pitch, and weather, and it is set in writing before work begins.

What shingles do you install?

Architectural shingles matched to the Florida-code system build. Your written estimate lists the exact product for your home, with options explained at the inspection.

What does the inspection document?

Deck condition where visible, shingle condition, flashing points, ventilation, attic signs where accessible, and dated photo findings you keep either way.

Will a new roof help with ice dams?

Ice dams form when attic heat melts snow that refreezes at the eave. Full-deck protection at the eaves and balanced ventilation both work against that cycle, and both are part of the system build and the inspection review.

How is the overall investment figured?

Roof size, pitch, layers to remove, decking condition, material selection, flashing complexity, ventilation work, and access. Each factor appears in the written estimate.

Do you work with insurance documentation after a storm?

The inspection produces dated photos and a written condition report you can hand to your insurer to organize the conversation. We document the roof. Your insurer decides coverage.

Do you offer monthly investment plans?

Yes. Low monthly investment plans available, reviewed in writing before you approve anything.

Related guides: How to Tell When a Roof Needs Replacement · Delaware Roof Replacement Investment Guide · How a Roof Inspection Works

Check service and request your free inspection

Free inspection, photo findings, and a written estimate.

Step 1 of 3
Where is the home?
Do you own this home?

Free inspection. No obligation.

What happens next

  1. We review your request and service area.
  2. We call to confirm your inspection time.
  3. We inspect the home, share photo findings, and prepare your written estimate.

Prefer to talk now?

Call (302) 286-9407

ProCraft is the only Delaware roofer licensed in Florida installing the Florida-code roofing system in Delaware.

You started an inspection request.