Delaware roof replacement and window replacement.(302) 286-9407
ProCraft Delaware
Roof ReplacementCommercial RoofingWindow ReplacementFlorida-Code SystemProcessService AreasAboutRequest My Free InspectionCall (302) 286-9407

Delaware roof replacement

A Florida-Code Roofing System, Installed in Delaware

ProCraft is the only Delaware roofer licensed in Florida installing the Florida-code roofing system in Delaware. Start with a free inspection, photo findings, and a written estimate for your home.

  • Free inspection with photo findings
  • Written estimate before you decide
  • Full replacements only, built as one system
Call (302) 286-9407
Delaware home with a completed ProCraft roof replacement

Check service and request your free inspection

Free inspection, photo findings, and a written estimate.

Step 1 of 3
Where is the home?
Do you own this home?

Free inspection. No obligation.

Free inspectionPhoto findingsWritten estimateLow monthly investment plans available

Start with what you are seeing

Six signs your roof is asking for an inspection

Aging roof

Aging roof

Shingles past their service life lose granules, curl at the edges, and stop shedding water the way they should.

Request a free inspection

Storm or hail concern

Storm or hail concern

Delaware storms bruise shingles and lift edges in ways that are hard to see from the ground.

Request a free inspection

Active leak

Active leak

Water inside means the system above it has already failed somewhere. Find the source before it spreads.

Request a free inspection

Missing or curling shingles

Missing or curling shingles

Exposed fasteners and lifted tabs are open doors for wind-driven rain.

Request a free inspection

Granules in gutters

Granules in gutters

Granules are the shingle's protective surface. When they wash off in volume, the roof is wearing out.

Request a free inspection

Attic moisture signs

Attic moisture signs

Stains, damp insulation, and musty attic air point at ventilation and deck problems above.

Request a free inspection

The differentiator

Why Florida Code Matters in Delaware

Florida code is written for hurricane wind and wind-driven rain. Delaware gets nor'easters, coastal storms, and winter ice. A system built for the harder standard is not overkill here. It is margin.

ProCraft is the only Delaware roofer licensed in Florida installing the Florida-code roofing system in Delaware. The system is installed as one build: deck preparation, full-deck protection, sealed seams, starter course, shingles, flashing, ventilation, and ridge finishing, each layer doing a job the next one depends on.

Learn How the System Works

Full-deck protection layer on a ProCraft roof installation

The system

Seven layers, one roof

Deck protection
Underlayment
Starter course
Shingles
Flashing
Ventilation
Ridge finishing
The Florida-code roofing system, layer by layer, as installed on Delaware homes.
  • 1Deck protection. The roof deck is inspected and prepared, with damaged sections documented before anything is covered up.
  • 2Underlayment. A full-deck protective layer goes down over the deck, the base of the Florida-code approach to wind-driven rain.
  • 3Starter course. Starter shingles seal the eave edge, the first line against wind uplift at the roof perimeter.
  • 4Shingles. Architectural shingles form the visible weathering surface, installed to the pattern the system calls for.
  • 5Flashing. Metal flashing seals the joints at walls, chimneys, and valleys, where most leaks actually start.
  • 6Ventilation. Balanced attic ventilation moves heat and moisture out, protecting the deck and the shingles above it.
  • 7Ridge finishing. Ridge cap shingles close the peak and finish the ventilation path at the top of the system.

Real work

Delaware homes, replaced by ProCraft

Completed roof replacement on a two-story Delaware home
Roof replacementTwo-story Delaware home, full system replacement.
Completed roof replacement on a Delaware ranch home
Roof replacementRanch home, full system replacement.
Finished ProCraft roof, close view of the shingle field
Roof replacementFinished shingle field on a completed ProCraft roof.

How it works

From inspection to final walkthrough

1

Inspection

Your roof or windows are documented with photos, measurements, and notes on condition, so the estimate is built on what is actually there.

2

Written Estimate

You receive the scope and the overall investment in writing, with product options explained in plain language before you decide anything.

3

Production

The approved work is performed under the written scope, with the site protected and debris removed as the work proceeds.

4

Final Walkthrough

The completed work is reviewed with you, and any open items are written down before the job is closed.

Check service and request your free inspection

Free inspection, photo findings, and a written estimate.

Step 1 of 3
Where is the home?
Do you own this home?

Free inspection. No obligation.

Monthly investment

Plan the investment on your terms

A full replacement is a major decision, and the written estimate comes first, with every factor listed. For homeowners who prefer to spread the investment out, low monthly investment plans available.

Request My Free Inspection

Delaware ranch home with a completed ProCraft roof

Coverage

Serving all three Delaware counties

New Castle County

Wilmington, Newark, Bear, Middletown, and the northern suburbs.

Roofing in New Castle County

Kent County

Dover, Smyrna, Milford, and the central Delaware towns.

Roofing in Kent County

Sussex County

Lewes, Rehoboth Beach, Seaford, Georgetown, and the beach towns.

Roofing in Sussex County

See every town we serve

Before we arrive

What the inspection covers, and who should be there

The inspection documents deck condition where visible, shingle condition, flashing points, ventilation, and attic signs where accessible. You receive dated photo findings and a written estimate.

Have every decision maker for the home present. The visit covers measurements, product choices, and the full estimate, and no one should have to make a decision this size from a secondhand summary.

  • Photo findings you keep either way
  • Measurements taken at the home
  • Product options explained in plain language
  • The overall investment in writing

What happens next

  1. We review your request and service area.
  2. We call to confirm your inspection time.
  3. We inspect the home, share photo findings, and prepare your written estimate.

Prefer to talk now?

Call (302) 286-9407

Questions

Delaware roof replacement, answered

What does the free inspection include?

A full look at the roof from the ground and from the roof surface where it is safe to walk, photos of every condition we find, measurements, and notes on the deck, flashing, and ventilation. You receive the photo findings and a written estimate for a full replacement when replacement is the right next step.

Does ProCraft replace roofs, or patch them?

ProCraft performs full roof replacements. We do not offer patch work, because a patch on a worn-out system rarely holds and it delays the real fix. The inspection documents what we find and the written estimate covers a complete replacement.

What makes the Florida-code system different?

The system is built to Florida code, the standard written for hurricane wind and wind-driven rain, and installed here in Delaware by the only Delaware roofer licensed in Florida. The difference is in the layers: full-deck protection, sealed seams, and fastening patterns chosen for storms stronger than Delaware usually sees.

How is the overall investment figured?

From the inspection: roof size, pitch, number of layers coming off, deck condition, flashing work, ventilation, and the shingle you choose. Every factor is listed in the written estimate so you can see exactly what you are approving.

Do you offer monthly investment plans?

Yes. Low monthly investment plans available, and the details are reviewed with you in writing before you approve anything.

Who should be at the inspection?

Every decision maker for the home. The inspection covers measurements, product choices, and the written estimate, and having everyone there means no one has to relay the details secondhand.

What areas do you serve?

All three Delaware counties: New Castle, Kent, and Sussex, including Wilmington, Newark, Dover, and the beach towns. Check your town on the Service Areas page, or start the form and we will confirm service for your ZIP.

What happens after I send the form?

We review your request and service area, call to confirm your inspection time, then inspect the home and prepare your written estimate. Your information is used to respond to your request. We do not sell your personal information.

Check service and request your free inspection

Free inspection, photo findings, and a written estimate.

Step 1 of 3
Where is the home?
Do you own this home?

Free inspection. No obligation.

What happens next

  1. We review your request and service area.
  2. We call to confirm your inspection time.
  3. We inspect the home, share photo findings, and prepare your written estimate.

Prefer to talk now?

Call (302) 286-9407

ProCraft is the only Delaware roofer licensed in Florida installing the Florida-code roofing system in Delaware.

Window replacement is a separate service with its own inspection and estimate. See window replacement

You started an inspection request.